|Year : 2022 | Volume
| Issue : 1 | Page : 59
A comparative evaluation of wear resistance of three types of artificial acrylic teeth after removing the glaze layer
Samaneh Abbasi1, Saeed Nikanjam1, Arash Shishehian1, Sara Khazaei1, Farnoush Fotovat1, Nilofar Heydar Pana2
1 Department of Prosthodontics, Faculty of Dentistry, Hamadan University of Medical Sciences, Hamadan, Iran
2 Dentistry Student, Faculty of Dentistry, Hamadan University of Medical Sciences, Hamadan, Iran
|Date of Submission||01-May-2020|
|Date of Acceptance||19-Sep-2020|
|Date of Web Publication||18-Jul-2022|
Dr. Saeed Nikanjam
Shahid Fahmideh Street, Hamedan
Source of Support: None, Conflict of Interest: None
Background: The posterior denture teeth wear faster than the anterior teeth, which can result in occlusal interferences, loss of vertical dimension of occlusion, greater stress accumulation in the anterior region, and higher ridge resorption. This study aimed to compare the wear resistance of three types of artificial acrylic teeth before and after removing the glaze layer.
Materials and Methods: This in vitro study compared three types of artificial acrylic teeth, namely, Finex (F), SR Orthotyp DCL (S), and Vita Physiodents (V) in six groups (n = 10). Half of the artificial teeth of each brand underwent 0.5-mm buccal reduction to remove the glaze layer (groups FC, SC, and VC). The teeth were thermocycled and placed in a chewing simulator. The teeth with and without the glaze layer were weighed before and after the wear test. The data were analyzed using ANCOVA (the level of significance was 0.05).
Results: The weight reduction (indicative of wear) was 0.03 ± 0.02 and 0.12 ± 0.03 mg in Groups S and SC, 0.03 ± 0.02 and 0.25 ± 0.04 mg in Groups V and VC, and 0.11 ± 0.15 and 0.28 ± 0.1 mg in groups F and FC, respectively. Removing the glaze layer (P < 0.01), type and brand of acrylic tooth (P < 0.01), and the baseline weight of artificial teeth (P < 0.01) had significant effects on wear resistance of artificial teeth.
Conclusion: The wear of artificial teeth was greater after removing the glaze layer, and the magnitude of wear was also significantly different among the three brands. The group FC showed maximum wear while the groups S and V showed minimum wear.
Keywords: Artificial, dental restoration wear, polymethyl methacrylate, tooth
|How to cite this article:|
Abbasi S, Nikanjam S, Shishehian A, Khazaei S, Fotovat F, Pana NH. A comparative evaluation of wear resistance of three types of artificial acrylic teeth after removing the glaze layer. Dent Res J 2022;19:59
|How to cite this URL:|
Abbasi S, Nikanjam S, Shishehian A, Khazaei S, Fotovat F, Pana NH. A comparative evaluation of wear resistance of three types of artificial acrylic teeth after removing the glaze layer. Dent Res J [serial online] 2022 [cited 2022 Aug 14];19:59. Available from: https://www.drjjournal.net/text.asp?2022/19/1/59/351341
| Introduction|| |
The materials used for the fabrication of artificial teeth such as the acrylic resins or porcelain have greatly evolved over time; however, an ideal material has not yet been introduced to meet all the prosthetic and esthetic needs of patients. The physical and mechanical properties of artificial teeth materials such as color stability, biocompatibility, compressive and tensile strengths, esthetic appearance, hardness, wear resistance, bonding ability to the denture base, minimal deformation, and stability of surface polish after baking play fundamental roles in achieving a successful prosthetic treatment. If these requirements are not met, complications such as impaired mastication, loss of vertical dimension of occlusion (VDO), impairment of occlusal relationship, oral tissue injury, resorption of the anterior part of the ridge, temporomandibular disorders, or loss of shape and esthetic appearance of the teeth may occur.,
The main drawback of artificial resin teeth is the fast wear of the posterior tooth surfaces and consequent change in VDO. It also adversely affects the occlusal relationship, the pressure applied to the oral mucosa and the underlying bone, and the esthetic appearance of the teeth. Several factors affect the wear of acrylic teeth such as the magnitude of applied load to the surfaces, the relative speed of movement of surfaces, surface characteristics, and material composition.
Older types of artificial teeth had two distinct layers of enamel and dentin. However, the newer types do not follow this classification and may have an additional middle layer between the enamel part and the base layer (dentin). Each layer has different characteristics in terms of hardness and monomer dispersion. Moreover, the outermost surface or the enamel layer of artificial teeth is often removed due to some reasons such as wear due to mastication or occlusal adjustments by dental clinicians. In complete denture treatment, the mean increase in the height of the incisal guidance pin after the acrylic baking is 0–1.49 mm. The abovementioned outermost layer is often removed by selective elimination of occlusal interferences in the laboratory or during clinical remounting to achieve maximum intercuspation. This would lead to exposure of the underlying layer of artificial teeth.
In denture fabrication, teeth with higher wear resistance should be selected, unless for some certain cases. In some cases, however, teeth with lower wear resistance are recommended to preserve the health of oral tissues. Such teeth are indicated for patients with lower masticatory forces or those under ridge augmentation treatment.
Considering the gap of information regarding the wear resistance of artificial teeth and the significance of this topic, this in vitro study aimed to compare the wear resistance of three types of artificial teeth. The null hypothesis was that there would be no significant difference in wear resistance of different types of artificial acrylic teeth.
| Materials and Methods|| |
This in vitro experimental study evaluated three types of artificial acrylic teeth, namely, Finex (BetaDent, Iran), SR Orthotyp DCL (Ivoclar Vivadent AG, Liechtenstein), and Vita Physiodens (VITA Zahnfabrik, Germany) [Table 1]. The right and left artificial first molar acrylic teeth were randomly divided into six groups (n = 10). The first three groups included the Finex (F), SR Orthotyp DCL (S), and the Vita Physiodens (V) groups. Each group included 10 artificial first molar teeth with an intact glaze layer. The second three groups were the same brands of artificial teeth with their glaze layer removed, referred to as the FC, SC, and VC groups, each including 10 artificial first molars with 0.5-mm buccal reduction to remove the glaze layer. Buccal reduction was performed using a diamond bur (Jota, Switzerland) and high-speed hand-piece (NSK Pana-Max, Japan). First, a positioning jig of silicone putty (Duosil™, SHERA Werkstoff-Technologie, Germany) was made according to the right or left molar tooth which covers the entire buccal surface. In the next step, a stainless steel mold was placed on the set of teeth, and the positioning putty, and then the self-cure acrylic resin (Acropars, Marlic, Iran) was injected. Using this positioning jig, all samples were mounted under uniform and standard conditions [Figure 1].
The samples then underwent thermal cycles in a thermocycler (MSCT-3; Convel) for 1 week, 3 weeks, and 6 weeks between 5°C and 55°C with a dwell time of 30 s and a transfer time of 10 s to simulate aging. Next, they were placed in an ultrasonic bath (EURONDA, Vicenza, Italy) to eliminate the loose particles. They were then transferred to an oven (LAC1–38 120V, Despatch, USA) and heated at 50°C for 120 min to complete dry. Finally, the teeth were weighed by a digital scale (BL120 Suartorius, Germany) with 0.0001 g accuracy.
Wear test and weighing the teeth
The teeth were then fixed in a chewing simulator (SD Mechatronic GmbH) to undergo wear in order to simulate the clinical setting [Figure 2]. In each cycle, first a stroke was applied to the surface followed by a back and forth horizontal motion. The applied load was 3 lb at a speed of 130 rpm. The maxillary first molars were used as the abrasive surface in the chewing simulator. Accordingly, the buccal surface of each mandibular first molar was abraded by the buccal surface of a maxillary first molar tooth of the same brand. Each tooth underwent 5000 cycles first, followed by another 5000 cycles (a total of 10,000 cycles). After 5000 cycles of wear, the teeth were placed in an ultrasonic bath for 10 min to eliminate the loose particles. Next, they were dried in an oven at 50°C for 120 min. Eventually, the teeth were weighed by a digital scale (BL120 Suartorius, Germany). After the second round of wear, the procedures were repeated. The change in weight of the teeth in each group after wear was then calculated compared with baseline. Eventually, the magnitude of wear in each group was calculated according to the mean change of weight.
The data were analyzed using SPSS version 25. The mean (± standard deviation) weight of artificial acrylic teeth before and after the wear test in the groups with and without the glaze layer, and the mean weight reduction after the wear test (indicative of the magnitude of wear) were calculated and reported. ANCOVA (analysis of covariance) was applied to assess the effect of type (brand) of artificial teeth, removal of glaze layer, and baseline weight of the teeth on the magnitude of wear. Level of significance was set at 0.05 (α = 0.05).
| Results|| |
[Table 2] shows the mean and standard deviation of the weight of artificial teeth at baseline and after the wear test. [Table 3] shows the mean and standard deviation of weight change of artificial teeth after the wear test compared with baseline in the groups.
|Table 2: Mean±standard deviation wear at baseline and after the wear test in different artificial teeth with/without the glaze layer|
Click here to view
|Table 3: Mean±standard deviation weight change of artificial teeth after the wear test in the six groups (n=10)|
Click here to view
The maximum mean weight was 16.34 ± 2.1 mg at baseline in group S, and the minimum mean weight was 14.51 ± 1.57 at baseline in group FC. The maximum mean weight was 16.31 ± 2.11 mg after wear test in group S, and the minimum mean weight was 14.23 ± 1.54 mg after wear test in group FC.
According to ANCOVA, presence/absence of the glaze layer (P < 0.01), the brand of artificial teeth (P < 0.01), and baseline weight of artificial teeth (P < 0.01) had significant effects on the magnitude of wear (wear resistance) of artificial teeth [Table 4]. The wear resistance of artificial teeth with/without the glaze layer was significantly different (P < 0.01). In all artificial teeth, the magnitude of wear was significantly greater after removal of the glaze layer.
|Table 4: Results of analysis of covariance to assess the effect of different variables on wear of artificial teeth|
Click here to view
| Discussion|| |
The current results revealed a significant difference in wear resistance of artificial teeth with and without the glaze layer, such that the magnitude of wear was higher after removal of the glaze layer in all three tested brands. Furthermore, the magnitude of wear (indicative of wear resistance) was significantly different between the three brands of artificial teeth. Greater wear following removal of the glaze layer is due to decreased cross-linking. Minimum wear was noted in group S, which was probably due to the composition of artificial teeth of this brand. These teeth are made of a polymer matrix and organic fillers that are homogeneously cross-linked. This composition yields excellent stability and high wear resistance. The wear of FC acrylic teeth was higher than that of other groups. Different behaviors of acrylic teeth in this respect can be due to the type and quality of acrylic resin used for the fabrication of artificial teeth. Other influential factors in this regard include the strength of artificial teeth, their form and shape (e.g. thickness of incisal edge or thickness of body), orientation of teeth mounted in acrylic base, errors in laboratory procedures, density, gaps and porosity of the material, manufacturing precision, and dispersion of polymer in artificial tooth structure. On the other hand, simulation of chewing forces and frequency of application of masticatory loads, occlusal forces, wear caused by the consumption of different foods and drinks, mechanical properties of the materials,, and some other factors also play a role in this respect. Furthermore, the worn particles remain in the environment and further enhance the process of wear as foreign bodies. However, in this study, the teeth were placed in an ultrasonic bath for 10 min after the first round of wear to eliminate the worn particles.
The type of wear test is an important parameter that can affect the wear behavior of artificial teeth. Although clinical studies provide more valuable information regarding the wear behavior of materials, they require a complex methodology, are costlier, and time-consuming. Thus, in vitro studies are more suitable for this purpose. However, in vitro studies also have limitations in the simulation of the clinical setting in terms of load application, neuromuscular movements, saliva pH, oral hygiene practice, and the nutritional regimen of patients.
The methods used for assessment of the magnitude of wear in previous studies include estimation of reduction in VDO, weight reduction, and volume reduction. In the present study, the weight reduction method was used for this purpose., Most researchers have used wear tests with rotational or back and forth movements. However, evidence shows that complex wear tests, despite the greater attention to details, are not significantly different from simple wear tests due to a higher rate of operator errors. Since the masticatory cycles in the oral environment range from 5000 to 300,000 cycles per day, 5000–10,000 chewing cycles were applied in this study to simulate the clinical setting.
On the other hand, two-dimensional wear was used in this study. In other words, no intervening abrasive material was used between the sample and the antagonistic tooth. Since both two-dimensional and three-dimensional wears occur in the oral cavity, the results of this study cannot be perfectly generalized to the clinical setting. The loads applied in the oral environment range from 1 to 3 lb (4.5–13.4 N). In this study, a 3 lb load was applied to the teeth at a speed of 130 rpm.
Preis et al. evaluated the wear of artificial denture materials and showed that different artificial denture teeth had significant differences in terms of wear in vitro. The same observations were reported in this study. Also, Kamonwanon et al. compared the wear resistance of five types of artificial teeth with those made of modified polymethyl methacrylate, and showed that artificial teeth made of modified polymethyl methacrylate had no significant difference with composite resin artificial teeth, but their wear resistance and surface hardness were higher. Hao et al. reported that the wear behavior of artificial teeth was variable based on their composition. The same results were reported by Suwannaroop et al. They reported variable wear resistance of different dental materials. Their results were in agreement with our findings. Ghazal et al. showed that composite resin teeth experienced greater wear than ceramic teeth, and acrylic resin teeth had less wear than ceramic teeth. Difference in wear resistance of artificial acrylic teeth was also observed in this study. Moreover, Reis et al. (2008) evaluated the wear of methyl methacrylate denture teeth but found no significant difference in wear between three types of denture teeth and glazed ceramic teeth, which was different from our findings. Difference in the results of the studies can be due to different methodologies and use of different denture teeth. Also, Stober et al. evaluated the wear resistance of nine acrylic resin denture teeth and showed that different denture materials experienced different magnitudes of wear. Munshi et al. (2017) found a significant difference in wear resistance of three types of denture teeth. Variations in the wear of artificial teeth were also noted in this study, which was in line with their findings.
The composition and type of abrasive material are important parameters affecting the results of studies. Although it may seem that only the hardness of abrasive material has a direct correlation with the degree of abrasion, it appears that aside from hardness, some other factors such as roughness and fracture resistance or strength of a material also affect its abrasiveness. Moreover, presence/absence of a third material in the environment can also affect the wear resistance. These materials either decrease the wear as a lubricant or serve as an abrasive and accelerate the wear. The abrasive surface in this study was the maxillary first molar teeth of the same brands to better simulate the oral clinical setting. The buccal surface of each mandibular first molar was worn by the buccal surface of the maxillary first molar of the same brand.
According to the current results, the wear of Finex, SR Orthotyp DCL, and Vita Physiodens artificial teeth was lower in the presence of the glaze layer. Removal of the glaze layer decreased the resistance of all three groups of artificial teeth to wear caused by the chewing cycles, and enhanced their wear. In the presence of the glaze layer, higher cross-linking increased the wear resistance. This topic has not been evaluated in any previous study to compare our results with.
Ideally, the wear behavior of dental materials and dental restorations should be similar to that of natural enamel. If so, the occlusal interferences caused by the differences in wear resistance of dental materials, restorations, and natural teeth are minimized. In order to choose artificial teeth with minimal wear, dentists should have adequate information about the wear behavior of different types of artificial teeth. In general, due to the limitations of studies on this topic, a definite conclusion regarding the effect of type (brand) of artificial teeth (and particularly their chemical composition) on wear resistance cannot be drawn. It may be assumed that the manufacturing technique and the commercial brand have a greater effect than the composition of artificial teeth on their wear behavior. However, further studies are warranted on different brands of artificial teeth using different clinical and laboratory methods.
| Conclusion|| |
According to the current results, presence/absence of the glaze layer (P < 0.01), the brand of artificial teeth (P < 0.01), and their baseline weight (P < 0.01) had significant effects on wear resistance of artificial teeth. The wear of artificial teeth was greater after removing the glaze layer. Furthermore, a significant difference was noted in wear resistance of the three brands of artificial teeth. Minimum wear was noted in groups SR Orthotyp DCL teeth with intact surface and Vita Physiodens teeth with intact surface while maximum wear was noted in group Finex teeth with 0.5-mm buccal reduction.
Financial support and sponsorship
Conflicts of interest
The authors of this manuscript declare that they have no conflicts of interest, real or perceived, financial or nonfinancial in this article.
| References|| |
Zarb GA, Hobkirk J, Eckert S, Jacob R. Prosthodontic treatment for edentulous patients-e-book: Complete dentures and implant-supported prostheses. Elsevier Health Sci 2013;139-44.
Powers JM, Sakaguchi RL, Craig RG. Craig's restorative dental materials. In: Ronald L. Sakaguchi, John M, editors. Craig's restorative dental materials: Philadelphia, PA: Elsevier/Mosby: Powers; 2012. p. 178-83.
Stober T, Bermejo JL, Rues S, Rammelsberg P. Wear of resin denture teeth in partial removable dental prostheses. J Prosthodont Res 2020;64:85-9.
Shetty MS, Shenoy KK. An in vitro
analysis of wear resistance of commercially available acrylic denture teeth. J Indian Prosthodont Soc 2010;10:149-53.
Suwannaroop P, Chaijareenont P, Koottathape N, Takahashi H, Arksornnukit M. In vitro
wear resistance, hardness and elastic modulus of artificial denture teet. Dent Mater J 2011;30:461-8.
Uehara PN, Iegami CM, Tamaki R, Ballester RY, de Souza RM, Laganá DC. Analysis of behavior of the wear coefficient in different layers of acrylic resin teeth. J Prosthet Dent 2019;121:967.e1-00000.
Shanmugam J, Ashok V. Evaluation of dimensional changes in denture base resins in different storage medium. Drug Invent Today 2019;12:1721-24.
Preis V, Hahnel S, Behr M, Rosentritt M. Contact wear of artificial denture teeth. J Prosthodont Res 2018;62:252-7.
Ghahramani L, Nokhbatolfoghahaei H, Shahabi S, Tamizi M, Fatemi M. Effect of different teeth preparations on the tensile bond strength of composite artificial teeth to acrylic denture base. J Dent Med 2014;27:24-32.
Abdalla MM, Masoud MA. Wear resistance of nano silica modified acrylic denture teeth and nano filled composite denture teeth. Egypt Dent J 2018;64:3651-9.
Bitencourt SB, Catanoze IA, da Silva EVF, Dos Santos PH, Dos Santos DM, Turcio KHL, et al
. Effect of acidic beverages on surface roughness and color stability of artificial teeth and acrylic resin. J Adv Prosthodont 2020;12:55-60.
Cassiano AF, Leite ARP, Policastro VB, Compagnoni MA, Pero AC. Evaluation of methods for stain removal in acrylic resin denture teeth: In vitro
study. Revista de Odontologia da UNESP 2016;45:195-200.
Shetty MS, Shenoy KK. An in vitro
analysis of wear resistance of commercially available acrylic denture teeth. J Indian Prosthodont Soc 2010;10:149-53.
Salazar CG, Todaro C, Bosio F, Bassini E, Ugues D, Peila D. A new test device for the study of metal wear in conditioned granular soil used in EPB shield tunneling. Tunn Undergr Sp Tech 2018;73:212-21.
Abbas M, Sakr H. Wear performance of nano-composite artificial denture teeth. Egypt Dent J 2017;63:2535-44.
Douglas WH, Delong R, Pintado MR, Latta MA. Wear rates of artificial denture teeth opposed by natural dentition. J Clin Dent 1993;4:43-7.
Kamonwanon P, Yodmongkol S, Chantarachindawong R, Thaweeboon S, Thaweeboon B, Srikhirin T. Wear resistance of a modified polymethyl methacrylate artificial tooth compared to five commercially available artificial tooth materials. J Prosthet Dent 2015;114:286-92.
Hao Z, Yin H, Wang L, Meng Y. Wear behavior of seven artificial resin teeth assessed with three-dimensional measurements. J Prosthet Dent 2014;112:1507-12.
Ghazal M, Steiner M, Kern M. Wear resistance of artificial denture teeth. Int J Prosthodont 2008;21:166-8.
Reis KR, Bonfante G, Pegoraro LF, Conti PC, Oliveira PC, Kaizer OB. In vitro
wear resistance of three types of polymethyl methacrylate denture teeth. J Appl Oral Sci 2008;16:176-80.
Stober T, Lutz T, Gilde H, Rammelsberg P. Wear of resin denture teeth by two-body contact. Dent Mater 2006;22:243-9.
Munshi N, Rosenblum M, Jiang S, Flinton R. In vitro
wear resistance of nano-hybrid composite denture teeth. J Prosthodont 2017;26:224-9.
Razak PA, Richard KM, Thankachan RP, Hafiz KA, Kumar KN, Sameer KM. Geriatric oral health: a review article. J Int Oral Health 2014;6:110-6.
[Figure 1], [Figure 2]
[Table 1], [Table 2], [Table 3], [Table 4]