| 1 |
Comparative evaluation of linear dimensional accuracy of impressions made with different elastomeric impression materials (Polyether and Polyvinyl siloxane) in angulated and parallel implants-An invitro study |
|
|
| Nirupam Paul, Jogeswar Barman, Barasha Goswami |
|
| IP International Journal of Maxillofacial Imaging. 2023; 9(1): 11 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 2 |
Influence of Implant Impression Methods, Polymer Materials, and Implant Angulation on the Accuracy of Dental Models |
|
|
| Daniela Djurovic Koprivica, Tatjana Puskar, Igor Budak, Mario Sokac, Milica Jeremic Knezevic, Aleksandra Maletin, Bojana Milekic, Djordje Vukelic |
|
| Polymers. 2022; 14(14): 2821 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 3 |
Comparison of the accuracy of impressions made of 2 implants with interfering axial convergence with CAD-CAM impression copings and the altered cast technique: An in vitro study |
|
|
| Maryam Sadegholvad, Elham Ansarifard, Reza Derafshi, Seyede Mina Salehi Dehno |
|
| The Journal of Prosthetic Dentistry. 2022; 128(4): 745.e1 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 4 |
Accuracy of digital implant impressions in clinical studies: A systematic review |
|
|
| Alexander Schmidt, Bernd Wöstmann, Maximiliane Amelie Schlenz |
|
| Clinical Oral Implants Research. 2022; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 5 |
Effect of Implant Angulation on the Rotational Displacement of a 3-Unit Bridge after Digital Impression |
|
|
| Mahnaz Arshad, Amirmohsen Asgari, Mohamad Javad Kharazifard, Narges Ameri, Cesar Rogério Pucci |
|
| International Journal of Dentistry. 2022; 2022: 1 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 6 |
Assessment of impression material accuracy in complete-arch restorations on four implants |
|
|
| Paolo Baldissara,Brunilda Koci,Aion Mangino Messias,Roberto Meneghello,Francesco Ghelli,Maria Rosaria Gatto,Leonardo Ciocca |
|
| The Journal of Prosthetic Dentistry. 2021; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 7 |
Effect of Implant Angulation and Depth on the Accuracy of Casts Using the Open Tray Splinted Impression Technique |
|
|
| Thanmai Taduri, Somil Mathur, Snehal Upadhyay, Khushali Patel, Meena Shah |
|
| Journal of Oral Implantology. 2021; 47(6): 447 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 8 |
Comparison of Dimensional Accuracy of Three Different Impression Materials Using Three Different Techniques for Implant Impressions: An In Vitro Study |
|
|
| Sunita Singh,Shabab A Khan,Nudrat Neyaz,Mishan Mohohar Jaiswal,Aditi S Tanwar,Amitu Singh |
|
| The Journal of Contemporary Dental Practice. 2021; 22(2): 172 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 9 |
Evaluation of rotational resistance, and rotational and vertical discrepancy of three different elastomeric impression materials with open tray implant level impressions on a special model |
|
|
| Ambedkar Elumalai, Saravanakumar Mariappan, ChitraShankar Krishnan, Hariharan Ramasubramanian, Jayakrishnakumar Sampathkumar, Hariharan Ramakrishnan, Azhagarasan Nagarasampatti Sivaprakasam, Vallabh Mahadevan |
|
| Journal of Dental Implant Research. 2021; 40(3): 66 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 10 |
A Comparative Study of Conventional versus Digital Impression Taking in Implant Dentistry- A Systematic Review |
|
|
| Hussien H,Mallesh N |
|
| Journal of Evolution of Medical and Dental Sciences. 2019; 8(44): 3362 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 11 |
Comparative Study of Dimensional Accuracy in Three Dental Implant Impression Techniques: Open Tray, Closed Tray with Impression Coping, and Snap Cap |
|
|
| Alireza Izadi,Bijan Heidari,Ghodratollah Roshanaei,Hanif Allahbakhshi,Farnoush Fotovat |
|
| The Journal of Contemporary Dental Practice. 2018; 19(8): 974 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 12 |
Cast accuracy obtained from different impression techniques at different implant angulations (in vitro study) |
|
|
| Enas A. Elshenawy,Ahmed M. Alam-Eldein,Fadel A. Abd Elfatah |
|
| International Journal of Implant Dentistry. 2018; 4(1) |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 13 |
Comparison of Some Mechanical and Physical Properties of three Types of Impression Materials with Different Dental Implant Angulations |
|
|
| Dhuha H. Mohammed,Abdalbseet A. Fatalla,Ghassak H. Jani |
|
| Biomedical and Pharmacology Journal. 2018; 11(3): 1359 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 14 |
Evaluation of the Accuracy of Conventional and Digital Impression Techniques for Implant Restorations |
|
|
| Renata Vasconcellos Moura,Alberto Noriyuki Kojima,Cintia Helena Coury Saraceni,Lucas Bassolli,Ivan Balducci,Mutlu Özcan,Alfredo Mikail Melo Mesquita |
|
| Journal of Prosthodontics. 2018; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 15 |
The accuracy of different dental impression techniques for implant-supported dental prostheses: A systematic review and meta-analysis |
|
|
| Tabea Flügge,Wicher Joerd van der Meer,Beatriz Gimenez Gonzalez,Kirstin Vach,Daniel Wismeijer,Ping Wang |
|
| Clinical Oral Implants Research. 2018; 29: 374 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 16 |
Accuracy and mechanical performance of passivated and conventional fabricated 3-unit fixed dental prosthesis on multi-unit abutments |
|
|
| Michael Stimmelmayr,Julian Groesser,Florian Beuer,Kurt Erdelt,Gerald Krennmair,Caroline Sachs,Daniel Edelhoff,Jan-Frederik Güth |
|
| Journal of Prosthodontic Research. 2017; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 17 |
Accuracy of various impression materials and methods for two implant systems: An effect size study |
|
|
| Alexander Schmidt,Teresa Häussling,Peter Rehmann,Heidrun Schaaf,Bernd Wöstmann |
|
| Journal of Prosthodontic Research. 2017; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 18 |
In Vitro Comparative Evaluation of Different Types of Impression Trays and Impression Materials on the Accuracy of Open Tray Implant Impressions: A Pilot Study |
|
|
| Sonam Gupta,Aparna Ichalangod Narayan,Dhanasekar Balakrishnan |
|
| International Journal of Dentistry. 2017; 2017: 1 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 19 |
Three-Dimensional Accuracy Evaluation of Two Additive Manufacturing Processes in the Production of Dental Models |
|
|
| Alexandru Victor Burde,Cristina Gasparik,Sorana Baciu,Marius Manole,Diana Dudea,Radu Septimiu Câmpian |
|
| Key Engineering Materials. 2017; 752: 119 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
